Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 830 G6. Confirm the exact model on the service label before starting.
HP EliteBook x360 830 G6 Notebook PC NFC module replacement. HP prints this procedure on printed page 50 of its maintenance and service guide, and the spare-part table for this part is on printed page 22.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L56453-001- NFC module (includes cables). Source: printed page 50.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 46). (printed page 47).
- Take the bottom cover off (the Bottom cover section is on page 35). (printed page 37).
- Take the battery out (the Battery section is on page 37). (printed page 38).
- Detach the TouchPad lead out of the ZIF connector on the NFC module (1). (printed page 50).
- Detach the card reader board lead out of the ZIF connector on the NFC module (2). (printed page 50).
- Take the NFC module from the machine (3). (printed page 50).
- Fit the replacement part by working back through the printed removal steps (printed page 50).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g6-nfc-module-replacement-p50