Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 15 G5. Confirm the exact model on the service label before starting.
HP ZBook 15 G5 display assembly replacement. HP prints this procedure on printed page 78 of its maintenance and service guide.
tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L28706-001- Display assembly, non-touch, UHD, UWVA, without webcam. Source: printed page 78.L28707-001- Display assembly, non-touch, UHD, UWVA, with webcam. Source: printed page 78.L28708-001- Display assembly, non-touch, UHD, UWVA, with webcam and IR camera. Source: printed page 78.L30384-001- Display assembly, touch screen, UHD, UWVA, without webcam and with privacy screen. Source: printed page 78.L30385-001- Display assembly, touch screen, UHD, UWVA, with webcam. Source: printed page 78.L30386-001- Display assembly, touch screen, UHD, UWVA, with webcam and IR camera. Source: printed page 78.
preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
replacement
- Open the machine with the screen at a 90 degree angle as shown inside the following image. (printed page 78).
- Take out the six Phillips 2.5x2.5 screws that hold the hinges to the computer. (printed page 78).
- Angle the computer toward the hinges (2). (printed page 78).
- Separate the display from the computer (3). (printed page 79).
- If it is necessary to replace the screen assembly subcomponents (printed page 79).
- If it is necessary to replace the screen panel (printed page 80).
- If it is needed to replace the webcam/microphone module (printed page 81).
- If it is needed to replace the IR camera module (printed page 82).
- If it is necessary to take the ambient light sensor board, detach the lead from the board (1), and after that lift upward to take the board from the screen (2). (printed page 83).
- If it is necessary to replace the screen hinges (printed page 83).
- If it is necessary to replace the display (printed page 83).
- If it is needed to replace the WLAN antennas, free the WLAN aerial leads from the routing channels built into the screen enclosure (1), and after that lift the leads from the screen enclosure (2). (printed page 84).
- If it is needed to replace the WWAN antennas, free the WWAN aerial leads from the routing channels built into the screen enclosure (1), and after that lift the leads from the screen enclosure (2). (printed page 85).
- If it is needed to replace the camera/ambient light sensor lead, free the camera/ambient light sensor lead from the routing channels built into the screen enclosure (1), and after that lift the lead from the screen enclosure (2). (printed page 85).
- the back cover of FHD panel is available as spare part number L28702-001 and the back cover of (printed page 85).
- Fit the replacement part by working back through the printed removal steps (printed page 85).
Part numbers in our catalog
- HP 15.6-inch display panel L30381-001 (L30381-001)
- HP 15.6-inch display panel L30382-001 (L30382-001)
- HP 15.6-inch display panel L30383-001 (L30383-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-15-g5-display-assembly-replacement