Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 15 G5. Confirm the exact model on the service label before starting.
HP ZBook 15 G5 Mobile Workstation service door replacement. HP prints this procedure on printed page 41.
Tools and parts
- Flat-bladed screwdriver, Magnetic screwdriver and Phillips P0 and P1 screwdrivers
- Static-safe work surface
L28746-001- Service door 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer.. Source: printed page 41.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 37. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Slide the service door latch carefully to the right (1). (printed page 41).
- If there is security screw present (printed page 41).
- Slide the service door clear from the computer until it unlatches (3). (printed page 41).
Part numbers in our catalog
- HP bottom cover L28709-001 (L28709-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-15-g5-service-door-replacement-p41