Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 15 G5. Confirm the exact model on the service label before starting.
HP ZBook 15 G5 Mobile Workstation nfc module replacement. HP prints the spare part table for this procedure on printed page 60.
Tools and parts
- Flat-bladed screwdriver, Magnetic screwdriver and Phillips P0 and P1 screwdrivers
- Static-safe work surface
L02249-001- NFC module. Source: printed page 60.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 37. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Power the machine down. (printed page 41).
- Detach the power from the notebook by unplugging the power cord from the computer. (printed page 41).
- Detach all external devices from the computer. (printed page 41).
- Take out the service door (see that procedure on page 41). (printed page 43).
- Take off the battery (see that procedure on page 43). (printed page 60).
- Take out the hard drive (see that procedure on page 45). (printed page 55).
- Take off the lower cover (see Bottom cover on page 55. (printed page 60).
- Detach the NFC antenna and the system board cabel from the ZIF connectors on the NFC (printed page 60).
- Use a tool to free the NFC unit from the adhesive securing it to the machine (3), and after that take the unit from the machine (4). (printed page 60).
- Install the nfc module by working back through the printed removal steps (printed page 60).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-15-g5-nfc-module-replacement-p60