Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 15u G5. Confirm the exact model on the service label before starting.
HP ZBook 15u G5 Mobile Workstation nfc module replacement. HP prints the spare part table for this procedure on printed page 64.
Tools and parts
- Phillips P0 screwdriver
- Static-safe work surface
L14385-001- NFC module (includes antenna and TouchPad foam). Source: printed page 64.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 31. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Power the machine down. (printed page 36).
- Detach the power from the notebook by unplugging the power cord from the computer. (printed page 36).
- Detach all external devices from the computer. (printed page 36).
- Take off the bottom cover (see that procedure on page 36). (printed page 38).
- Take off the battery (see that procedure on page 50). (printed page 60).
- Detach the system board cable and the NFC antenna from the ZIF connectors on the NFC (printed page 64).
- Use a tool to free the NFC unit from the adhesive securing it to the machine (3), and after that take the unit from the machine (4). (printed page 64).
- Install the nfc module by working back through the printed removal steps (printed page 64).
Parts this procedure uses
- HP NFC module L14385-001 (L14385-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-15u-g5-nfc-module-replacement-p64