Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 15u G5. Confirm the exact model on the service label before starting.
HP ZBook 15u G5 Mobile Workstation rj-45 board and bracket replacement. HP prints the spare part table for this procedure on printed page 57.
tools and parts
- Phillips P0 screwdriver
- Static-safe work surface
L19421-001- RJ-45 board with bracket. Source: printed page 57.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 31. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
- Power the machine down. (printed page 40).
- Detach all external devices connected to the computer. (printed page 40).
- Cut the power by pulling the cord out of the wall outlet, and after that unplugging the AC adapter from the machine. (printed page 40).
- Take off the bottom cover (see that procedure on page 36). (printed page 38).
- Detach the battery cable from the system board (see that procedure on page 50). (printed page 38).
replacement
- Take out the five Phillips M2.5×5.0 screws that hold the assembly to the computer. (printed page 57).
- Rotate the assembly out of the computer (2). (printed page 57).
- Install the rj-45 board and bracket by working back through the printed removal steps (printed page 57).
Parts this procedure uses
- HP RJ-45 board with bracket L19421-001 (L19421-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-15u-g5-rj-45-board-and-bracket-replacement-p57