Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 17 G4. Confirm the exact model on the service label before starting.
HP ZBook 17 G4 display assembly replacement. HP prints this procedure on printed page 70 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
921322-001- Touch screen, FHD, UWVA, with camera. Source: printed page 70.921323-001- Non-touch, UHD, UWVA, DRM3. Source: printed page 70.921324-001- Non-touch, UHD, UWVA, DRM3 with camera. Source: printed page 70.819347-002- Raw panel, FHD. Source: printed page 70.819348-002- Raw panel, HD+. Source: printed page 70.936516-001- Raw panel, FHD, includes cable. Source: printed page 70.936517-001- Raw panel, HD+, includes cable. Source: printed page 70.906120-001- Hinge Kit (includes left and right hinges). Source: printed page 70.848368-001- Bezel with use in models without a camera. Source: printed page 70.850119-001- Bezel for use in models with a camera. Source: printed page 70.848379-001- LCD cable. Source: printed page 70.819336-006- Webcam, 1p DM U2 Mjpeg 720p CTS Vaughn. Source: printed page 70.854110-001- Microphone board. Source: printed page 70.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Remove the six Phillips screws that secure each hinge to the computer. (printed page 70).
- Open the computer as far as possible. (printed page 70).
- Separate the display from the computer. (printed page 71).
- Disengage the bezel with a plastic tool, starting at the top, the left and right sides, and the bottom. (printed page 71).
- Remove the display bezel. (printed page 71).
- Remove the four Phillips screws that hold the display panel to the display enclosure. (printed page 71).
- Lift the top edge of the panel and swing it up and forward so that it lies upside down in front of the display enclosure. (printed page 72).
- Lift the tape and disconnect the display panel cable from the panel. (printed page 72).
- Remove the display panel. (printed page 72).
Parts this procedure uses
- HP hinge kit 906120-001 (906120-001)
- HP Display bezel for models without camera 848368-001 (848368-001)
- HP Display bezel for models with camera 850119-001 (850119-001)
- HP display cable 848379-001 (848379-001)
- HP camera module 819336-006 (819336-006)
- HP Microphone board 854110-001 (854110-001)
Part numbers in our catalog
- HP 17.3-inch display panel 819347-002 (819347-002)
- HP 17.3-inch display panel 936516-001 (936516-001)
- HP 17.3-inch display panel 819348-002 (819348-002)
- HP 17.3-inch display panel 936517-001 (936517-001)
- HP Touch display panel, FHD, UWVA, with camera 921322-001 (921322-001)
- HP Non-touch display panel, UHD, UWVA, DRM3 921323-001 (921323-001)
- HP Non-touch display panel, UHD, UWVA, DRM3, camera 921324-001 (921324-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-17-g4-display-assembly-replacement-p70