HP ZBook 17 G4 display led board replacement

Step-by-step HP ZBook 17 G4 display led board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 31–63). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP ZBook 17 G4. Confirm the exact model on the service label before starting.

HP ZBook 17 G4 Mobile Workstation display led board replacement. HP prints the spare part table for this procedure on printed page 62.

tools and parts

  • Flat-bladed screwdriver, Magnetic screwdriver and Phillips P0 and Torx8 T8 screwdrivers
  • Static-safe work surface

preparation

HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 25. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.

  1. Power the machine down. (printed page 31).
  2. Detach the power from the notebook by unplugging the power cord from the computer. (printed page 31).
  3. Detach all external devices from the computer. (printed page 31).
  4. Take out the following components: (printed page 34).

replacement

  1. Open the ZIF connector (1) on the main board to free the screen LED board ribbon lead, and after that free the ribbon lead (2) from the adhesive securing it to the machine. (printed page 63).
  2. Take out the screw securing the board to the computer (printed page 63).
  3. Install the display led board by working back through the printed removal steps (printed page 63).

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-17-g4-display-led-board-replacement-p62

Key facts

HP document part number
917650-002
Model
HP ZBook 17 G4
Release year
2017
Screen size
17.3"
Printed pages
31–63

Related