Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 17 G4. Confirm the exact model on the service label before starting.
HP ZBook 17 G4 Mobile Workstation smart card reader replacement. HP prints the spare part table for this procedure on printed page 53.
tools and parts
- Flat-bladed screwdriver, Magnetic screwdriver and Phillips P0 and Torx8 T8 screwdrivers
- Static-safe work surface
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 25. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
- Power the machine down. (printed page 31).
- Detach the power from the notebook by unplugging the power cord from the computer. (printed page 31).
- Detach all external devices from the computer. (printed page 31).
- Take out the following components: (printed page 34).
replacement
- Take out 3 Phillips screws (1) (printed page 53).
- Detach the smart card reader cable off the system board (1) (printed page 54).
- Install the smart card reader by working back through the printed removal steps (printed page 54).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-17-g4-smart-card-reader-replacement-p53