Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 1040 G11. Confirm the exact model on the service label before starting.
HP Elitebook 1040 14 inch G11 Notebook fingerprint reader replacement. HP prints this procedure on printed page 59 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N98113-001- Fingerprint reader (includes cable). Source: printed page 59.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Take out the two Phillips M1.5 × 2.9 screws that hold the fingerprint reader and bracket to the (printed page 59).
- Detach the fingerprint reader from the computer. The fingerprint reader is fixed to the (printed page 59).
- Take out the fingerprint reader bracket and fingerprint reader from the computer. (printed page 59).
Part numbers in our catalog
- HP fingerprint reader (with cable) (N98113-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-14-inch-g11-notebook-fingerprint-reader-replacement-p59