Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 1040 G11. Confirm the exact model on the service label before starting.
HP Elitebook 1040 14 inch G11 Notebook nfc module replacement. HP prints this procedure on printed page 64 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N08706-001- NFC module. Source: printed page 64.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Let go of the ZIF connector the NFC module antenna cable is connected to (printed page 64).
- Detach the NFC module from the computer. The NFC module is fixed to the computer with (printed page 65).
- Get the computer ready for disassembly (see that procedure on page 44). (printed page 46).
- Take off the bottom cover (see that procedure on page 44). (printed page 46).
- Lift the battery out of the computer (see that procedure on page 45). (printed page 63).
Parts this procedure uses
- HP NFC module N08706-001 (N08706-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-14-inch-g11-notebook-nfc-module-replacement-p64