Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 1040 G11. Confirm the exact model on the service label before starting.
HP Elitebook 1040 14 inch G11 Notebook ssd replacement. HP prints this procedure on printed page 49 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M52027-001- 2 TB, M.2 2280, PCIe-4×4, ZTurbo SSD with TLC. Source: printed page 49.M16560-001- 1 TB, 2280, PCIe-4×4, NVMe, SSD with TLC. Source: printed page 49.N45474-001- 1 TB, M.2 2280, PCIe-4×4, NVMe, value SSD. Source: printed page 49.N45476-001- 512 GB, M.2 2280, PCIe-4×4, NVMe, SSD. Source: printed page 49.M17436-001- 512 GB, 2280, PCIe-4×4, NVMe, SSD with TLC. Source: printed page 49.M52031-001- 512 GB, M.2 2280, PCIe-4×4, SSD with SED and TLC. Source: printed page 49.N45477-001- 256 GB, M.2 2280, PCIe-4×4, NVMe, SSD. Source: printed page 49.N35225-001- 256 GB, M.2 2280, PCIe-4×4, NVMe, SSD with SED and TLC. Source: printed page 49.N77396-001- 2 TB, 2280, PCIe-4×4, NVMe SSD with TLC. Source: printed page 49.N77395-001- 1 TB, 2280, PCIe-4×4, NVMe, SSD with TLC. Source: printed page 49.N77394-001- 1 TB, 2280, PCIe-4×4, NVMe, value SSD. Source: printed page 49.N77393-001- 512 GB, 2280, PCIe-4×4, NVMe, SSD with TLC. Source: printed page 49.N77392-001- 512 GB, 2280, PCIe-4×4, NVMe, value SSD. Source: printed page 49.N77391-001- 256 GB, 2280, PCIe-4×4, NVMe, value SSD. Source: printed page 49.N98115-001- SSD bracket included in the Bracket Kit, spare part number. Source: printed page 49.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Take out the Phillips M2.0 × 2.4 screw that holds the SSD to the computer. (printed page 49).
- Lift the edge of the SSD opposite the slot until it sits at an angle. (printed page 49).
- Take out the SSD by pulling the drive away off the slot at an angle. (printed page 50).
- Thoroughly clean the compound from the surfaces of the SSD (1) as well as the main board (2) each time you take the SSD. (printed page 50).
Part numbers in our catalog
- HP SSD N45476-001 (N45476-001)
- HP SSD N35225-001 (N35225-001)
- HP SSD M52027-001 (M52027-001)
- HP SSD M16560-001 (M16560-001)
- HP SSD N77395-001 (N77395-001)
- HP SSD N77391-001 (N77391-001)
- HP SSD N45474-001 (N45474-001)
- HP SSD N77393-001 (N77393-001)
- HP SSD M52031-001 (M52031-001)
- HP SSD N77396-001 (N77396-001)
- HP SSD N45477-001 (N45477-001)
- HP SSD M17436-001 (M17436-001)
- HP SSD N77394-001 (N77394-001)
- HP SSD N77392-001 (N77392-001)
- HP SSD bracket, Included in the Bracket Kit N98115-001 (N98115-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-14-inch-g11-notebook-ssd-replacement-p49