HP EliteBook 1040 G11 touchpad replacement

Step-by-step HP EliteBook 1040 G11 touchpad replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN98120-001HP touchpad with NFC antenna for the HP EliteBook 1040 G11
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 46–67). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 1040 G11. Confirm the exact model on the service label before starting.

HP Elitebook 1040 14 inch G11 Notebook touchpad replacement. HP prints this procedure on printed page 65 of its maintenance and service guide.

tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • N98120-001 - For use on computer models equipped with NFC (includes NFC module antenna and cable). Source: printed page 66.
  • N98119-001 - For use on computer models not equipped with NFC. Source: printed page 66.

preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

  1. Get the computer ready for disassembly (see that procedure on page 44). (printed page 46).
  2. Take off the bottom cover (see that procedure on page 44). (printed page 46).
  3. Lift the battery out of the computer (see that procedure on page 45). (printed page 63).

replacement

  1. Let go of the ZIF connector the NFC module antenna cable is connected to (printed page 66).
  2. Take out the three Phillips M2.0 × 2.4 broadhead screws that hold the touchpad to the (printed page 66).
  3. Lift the rear edge of the touch pad until it rests at an angle. (printed page 66).
  4. Take out the touchpad by sliding it up and back at an part. (printed page 67).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-14-inch-g11-notebook-touchpad-replacement-p65

Key facts

HP document part number
N99985-002
Model
HP EliteBook 1040 G11
Release year
2024
Screen size
14"
Printed pages
46–67

Related