Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 1040 G11. Confirm the exact model on the service label before starting.
HP Elitebook 1040 14 inch G11 Notebook transfer board cable replacement. HP prints this procedure on printed page 67 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N98118-001- Transfer board (includes cable). Source: printed page 68.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Let go of the ZIF connector the transfer board cable is connected to (printed page 67).
- Let go of the ZIF connector the transfer board cable is connected to (printed page 67).
- Take out the transfer board cable from the computer. (printed page 68).
Parts this procedure uses
- HP Motherboard N98118-001 (N98118-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-14-inch-g11-notebook-transfer-board-cable-replacement-p67