HP EliteBook 1040 G11 wlan module replacement

Step-by-step HP EliteBook 1040 G11 wlan module replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN39883-001HP Motherboard N39883-001 for the HP EliteBook 1040 G11
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 51–52). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 1040 G11. Confirm the exact model on the service label before starting.

HP Elitebook 1040 14 inch G11 Notebook wlan module replacement. HP prints this procedure on printed page 51 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • M53363-001 - Intel AX211 Wi-Fi 6E + Bluetooth 5.3 M.2 2230 vPro 160 MHz CNVi WW WLAN module. Source: printed page 50.
  • M53366-001 - Intel AX211 Wi-Fi 6E + Bluetooth 5.3 M.2 2230 non-vPro 160 MHz CNVi WW WLAN module. Source: printed page 50.
  • N39883-001 - Intel BE200 M.2 2230 Wi-Fi 7 + Bluetooth 5.4 non-vPro WW WLAN module. Source: printed page 51.

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Gently detach the two WLAN antenna cables from the terminals on the WLAN module. (printed page 51).
  2. Take out the Phillips M2.0 × 2.4 screw that holds the WLAN module to the system board. (printed page 51).
  3. Lift the edge of the WLAN module opposite until it rests at an angle. (printed page 51).
  4. Take out the wlan module by drawing the module out of the slot at an angle. (printed page 51).
  5. if the wlan antenna has no connection to the terminal on the wlan module, fit a protective (printed page 52).

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-14-inch-g11-notebook-wlan-module-replacement-p51

Key facts

HP document part number
N99985-002
Model
HP EliteBook 1040 G11
Release year
2024
Screen size
14"
Printed pages
51–52

Related