Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 860 G10. Confirm the exact model on the service label before starting.
HP EliteBook 860 16 inch G10 Notebook PC fan assembly replacement. HP prints this procedure on printed page 51 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N09035-001- Fan for use in models with 15 W processors. Source: printed page 50.N09036-001- Fan for use in models with 28 W processors. Source: printed page 50.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Take the leads off the clips along the side of the fan (1). (printed page 51).
- Take the three Phillips M2.0 × 5.0 fasteners (2) that hold the fan to the machine. (printed page 51).
- Detach the fan lead from the main board (3), and after that take the fan from the machine (4). (printed page 51).
Part numbers in our catalog
- HP cooling fan N09035-001 (N09035-001)
- HP cooling fan N09036-001 (N09036-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-860-16-inch-g10-fan-assembly-replacement-p51