Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 860 G10. Confirm the exact model on the service label before starting.
HP EliteBook 860 16 inch G10 Notebook PC system board replacement. HP prints this procedure on printed page 57 of its maintenance and service guide, and the spare-part table for this part is on printed page 19.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N08101-601- Equipped with an Intel Core i5-1250P G9 processor, with 16 GB of system memory, UMA memory and a Windows 11 operating system. Source: printed page 57.N08100-601- Equipped with an Intel Core i5-1240P G9 processor, with 16 GB of system memory, UMA memory and a Windows 11 operating system. Source: printed page 57.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 37). (printed page 42).
- Take the bottom cover off (the Bottom cover section is on page 37). (printed page 39).
- Take the battery out (the Battery section is on page 38). (printed page 40).
- Detach those leads from the main board: (printed page 57).
- Take the four Phillips M2.0 × 4.0 fasteners (1) that hold the bracket to the main board, and after that take the bracket (2). (printed page 58).
- Take the two Phillips M2.0 × 4.0 fasteners (1), three Phillips M2.0 × 2.0 fasteners (2), and the Phillips M1.6 × 4.0 fastener (3) from the main board. (printed page 59).
- Lift the left side of the main board upward (1), and after that pull the main board away out of the connectors on the side of the machine to lift it out (2). (printed page 59).
- Fit the replacement part by working back through the printed removal steps (printed page 59).
Part numbers in our catalog
- HP System board repair support kit N49516-888 (N49516-888)
- HP System board, Intel Core i5-1340P N43984-xx1 (N43984-xx1)
- HP System board, Intel Core i5-1350P, OSR N43985-xx1 (N43985-xx1)
- HP System board, Intel Core i5-1350P N43986-xx1 (N43986-xx1)
- HP System board, Intel Core i7-1360P N43987-xx1 (N43987-xx1)
- HP System board, Intel Core i7-1370P N43988-xx1 (N43988-xx1)
- HP System board, Intel Core i7-1370P, OSR N43989-xx1 (N43989-xx1)
- HP System board, Intel Core i5-1335U N45151-xx1 (N45151-xx1)
- HP System board, Intel Core i7-1345U, OSR N45152-xx1 (N45152-xx1)
- HP System board, Intel Core i7-1345U N45153-xx1 (N45153-xx1)
- HP System board, Intel Core i7-1355U N45154-xx1 (N45154-xx1)
- HP System board, Intel Core i7-1365U N45155-xx1 (N45155-xx1)
- HP System board, Intel Core i7-1365U, OSR N45156-xx1 (N45156-xx1)
- HP ACS board N49512-001 (N49512-001)
- HP Hub board, RGB N49513-001 (N49513-001)
- HP Hub board, IR N49514-001 (N49514-001)
- HP OLED board N49538-001 (N49538-001)
- HP Motherboard N08100-601 (N08100-601)
- HP Motherboard N08101-601 (N08101-601)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-860-16-inch-g10-system-board-replacement-p57