Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 860 G10. Confirm the exact model on the service label before starting.
HP EliteBook 860 16 inch G10 power connector cable replacement. HP prints this procedure on printed page 53 of its maintenance and service guide, and the spare-part table for this part is on printed page 53.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N08540-001- Power connector cable. Source: printed page 53.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 37). (printed page 42).
- Take the bottom cover off (the Bottom cover section is on page 37). (printed page 39).
- Take the battery out (the Battery section is on page 38). (printed page 40).
- Detach the lead from the main board (1). (printed page 53).
- Undo the Phillips M2.0 × 5.0 fastener (2) that holds the power connector lead to the machine. (printed page 53).
- Take the power connector lead from the machine (3). (printed page 54).
Part numbers in our catalog
- HP cable N08556-001 (N08556-001)
- HP power connector cable (N08540-001)
- HP USB-C dock with cable L64086-001 (L64086-001)
- HP USB-C/A universal dock with cable L64087-001 (L64087-001)
- HP Sure Key cable lock L65088-001 (L65088-001)
- HP Cable kit for the Thunderbolt 120 W G4 dock M88058-001 (M88058-001)
- HP Cable kit for the Thunderbolt 280 W G4 dock M88059-001 (M88059-001)
- HP Thunderbolt 120 W G4 dock with cable M97105-001 (M97105-001)
- HP Thunderbolt 280 W G4 dock with cable M97106-001 (M97106-001)
- HP Thunderbolt 120 W G4 dock with cable N17490-001 (N17490-001)
- HP Thunderbolt 280 W G4 dock with cable N17491-001 (N17491-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-860-16-inch-g10-power-connector-cable-replacement-p53