Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 860 G10. Confirm the exact model on the service label before starting.
HP EliteBook 860 16 inch G10 Notebook PC fan replacement. HP prints this procedure on printed page 39 of its maintenance and service guide, and the spare-part table for this part is on printed page 50.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N09035-001- Fan for use in models with 15 W processors. Source: printed page 50.N09036-001- Fan for use in models with 28 W processors. Source: printed page 50.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 37). (printed page 42).
- Take the bottom cover off (the Bottom cover section is on page 37). (printed page 39).
- Take the battery out (the Battery section is on page 38). (printed page 40).
Part numbers in our catalog
- HP cooling fan N09035-001 (N09035-001)
- HP cooling fan N09036-001 (N09036-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-860-16-inch-g10-fan-replacement-p39