Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 860 G10. Confirm the exact model on the service label before starting.
HP EliteBook 860 16 inch G10 Notebook PC speakers replacement. HP prints this procedure on printed page 48 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N08127-001- Speaker Kit. Source: printed page 47.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 37). (printed page 42).
- Take the bottom cover off (the Bottom cover section is on page 37). (printed page 39).
- Take the battery out (the Battery section is on page 38). (printed page 40).
- Detach the speaker leads from the main board (1). (printed page 48).
- Take the two Phillips M2.0 × 2.0 fasteners (2) that hold each speaker to the machine. (printed page 48).
- Take the lead between the speakers from the clips (3), and after that take the speakers from the machine (4). (printed page 48).
Part numbers in our catalog
- HP speaker kit N08127-001 (N08127-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-860-16-inch-g10-speakers-replacement-p48