Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 1030 G4. Confirm the exact model on the service label before starting.
HP EliteBook x360 1030 G4 Notebook PC audio jack board replacement. HP prints this procedure on printed page 40 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L31858-001- Audio jack board. Source: printed page 40.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Take out the safety tape from the audio jack board (1). (printed page 40).
- Detach the lead from the ZIF plug on the audio jack board (2). (printed page 40).
- Take out the Phillips M2.0 × 3.0 screw (3) (printed page 40).
- Fit the replacement part by working back through the printed removal steps (printed page 40).
Part numbers in our catalog
- HP audio jack board (L31858-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-1030-g4-audio-jack-board-replacement-p40