Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 1030 G4. Confirm the exact model on the service label before starting.
HP EliteBook x360 1030 G4 Notebook PC bottom cover replacement. HP prints this procedure on printed page 29 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L70754-001- Bottom cover. Source: printed page 29.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Take out the four Torx T5 2.0 × 7.0 screws and loosen the captive Torx screw that holds the (printed page 29).
- Seat a nonmarking, nonconductive, thin tool near the hinge and pull up to free the cover. (printed page 30).
- Take out the bottom cover (3). (printed page 30).
- Fit the replacement part by working back through the printed removal steps (printed page 30).
Part numbers in our catalog
- HP bottom cover (base enclosure) L70754-001 (L70754-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-1030-g4-bottom-cover-replacement-p29