Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 1030 G4. Confirm the exact model on the service label before starting.
HP EliteBook x360 1030 G4 Notebook PC audio module replacement. HP prints this procedure on printed page 31 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L31858-001- Audio jack board. Source: printed page 40.L70755-001- NOTE: The audio cable is available in the Cable Kit, spare part number. Source: printed page 40.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 29). (printed page 31).
- Take the bottom cover off (the Bottom cover section is on page 29). (printed page 31).
- Take the battery out (the Battery section is on page 31). (printed page 34).
Parts this procedure uses
- HP cable L70755-001 (L70755-001)
Part numbers in our catalog
- HP audio jack board (L31858-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-1030-g4-audio-module-replacement-p31