HP EliteBook x360 1030 G4 fingerprint reader board replacement

Step-by-step HP EliteBook x360 1030 G4 fingerprint reader board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needL70757-001HP fingerprint reader board (with cable) for the HP EliteBook x360 1030 G4
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 36). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook x360 1030 G4. Confirm the exact model on the service label before starting.

HP EliteBook x360 1030 G4 fingerprint reader board replacement. HP prints this procedure on printed page 36 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • L70757-001 - Fingerprint reader board (includes cable). Source: printed page 36.

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Take out the two Phillips M2.0 × 2.0 screws that hold the fingerprint reader bracket to the (printed page 36).
  2. Detach the lead from the reverse ZIF plug on the fingerprint reader board (3). (printed page 36).
  3. Take out the fingerprint reader board from the computer (4). (printed page 36).
  4. Fit the replacement part by working back through the printed removal steps (printed page 36).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-1030-g4-fingerprint-reader-board-replacement-p36

Key facts

HP document part number
L79515-001
Model
HP EliteBook x360 1030 G4
Release year
2019
Screen size
13.3"
Printed pages
36

Related