Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 1030 G4. Confirm the exact model on the service label before starting.
HP EliteBook x360 1030 G4 Notebook PC nfc module replacement. HP prints this procedure on printed page 39 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L02249-001- NFC module. Source: printed page 39.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the NFC lead from the ZIF plug on the NFC module (1). (printed page 39).
- Detach the aerial lead from the ZIF plug on the NFC module (2). (printed page 39).
- Use a tool to free the NFC module from the adhesive that holds it to the machine (3), and after that (printed page 39).
- Fit the replacement part by working back through the printed removal steps (printed page 39).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-1030-g4-nfc-module-replacement-p39