HP EliteBook x360 1030 G4 system board replacement

Step-by-step HP EliteBook x360 1030 G4 system board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needL70766-601HP motherboard L70766-601 for the HP EliteBook x360 1030 G4
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 41–43). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook x360 1030 G4. Confirm the exact model on the service label before starting.

HP EliteBook x360 1030 G4 Notebook PC system board replacement. HP prints this procedure on printed page 41 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Detach the following cables: (printed page 41).
  2. Take out the protective tape and the two Phillips M2.0 × 5.0 screws that hold the system board (printed page 42).
  3. Take out the shield sensor bracket (3). (printed page 42).
  4. Take out the three Phillips M2.0 × 3.0 screws that hold the system board to the computer. (printed page 43).
  5. Take out the SIM card or SIM card put in from the system board (1). (printed page 43).
  6. Rotate the system board up (2) (printed page 43).
  7. Fit the replacement part by working back through the printed removal steps (printed page 43).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-1030-g4-system-board-replacement-p41

Key facts

HP document part number
L79515-001
Model
HP EliteBook x360 1030 G4
Release year
2019
Screen size
13.3"
Printed pages
41–43

Related