Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 1030 G4. Confirm the exact model on the service label before starting.
HP EliteBook x360 1030 G4 Notebook PC touchpad replacement. HP prints this procedure on printed page 37 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L70774-001- Touchpad for use in models without NFC (includes bracket). Source: printed page 37.L70775-001- Touchpad for use in models with NFC module (includes bracket). Source: printed page 37.L70755-001- Touchpad cable (available in the Cable Kit). Source: printed page 37.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the touchpad cable from carefully the touchpad ZIF connector (1). (printed page 37).
- Take out the six Phillips M2.0 × 2.0 screws that hold the touchpad to the computer, and then (printed page 37).
- Fit the replacement part by working back through the printed removal steps (printed page 37).
Parts this procedure uses
- HP cable L70755-001 (L70755-001)
Part numbers in our catalog
- HP touchpad (models without NFC) (L70774-001)
- HP touchpad (models with NFC) (L70775-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-1030-g4-touchpad-replacement-p37