Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 440 G11. Confirm the exact model on the service label before starting.
HP ProBook 440 14 inch G11 Notebook battery replacement. HP prints this procedure on printed page 48 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N70706-005- 3 cell, 56 Whr. Source: printed page 47.N70705-005- 3 cell, 48 Whr. Source: printed page 47.N96234-001- Battery latches (included in the Plastics Kit). Source: printed page 47.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the battery cable from the system board. (printed page 48).
- Rotate the two latches that hold the battery to the computer. (printed page 48).
- Use the tabs to remove the battery from the computer. (printed page 48).
- To remove the battery latches (printed page 48).
Parts this procedure uses
- HP Plastics and rubber kit N96234-001 (N96234-001)
Part numbers in our catalog
- HP 3-cell 56 Wh battery (N70706-005)
- HP 3-cell 48 Wh battery (N70705-005)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-440-14-inch-g11-notebook-battery-replacement-p48