HP ProBook 440 G11 bottom cover replacement

Step-by-step HP ProBook 440 G11 bottom cover replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN96446-001HP bottom cover (plastic) for the HP ProBook 440 G11
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 37–38). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP ProBook 440 G11. Confirm the exact model on the service label before starting.

HP ProBook 440 14 inch G11 Notebook bottom cover replacement. HP prints this procedure on printed page 36 of its maintenance and service guide.

tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • N96446-001 - Bottom cover, plastic. Source: printed page 36.
  • N96447-001 - Bottom cover, metal, for use in models with discrete graphics memory. Source: printed page 36.
  • N96448-001 - Bottom cover, metal, for use in models with UMA graphics memory. Source: printed page 36.

preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

replacement

  1. Loosen the five captive Phillips screws that hold the bottom cover to the computer. (printed page 37).
  2. Starting near the hinges (printed page 37).
  3. Take out the bottom cover from the computer (2). (printed page 37).
  4. Go to http (printed page 38).
  5. Select Product Information. (printed page 38).
  6. see the options listed to find the card to buy. (printed page 38).
  7. Power the machine down by using the Shut down command. (printed page 38).
  8. Seat the SIM card into the SIM card slot, as well as after that push in on the SIM card until it is securely seated. (printed page 38).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-440-14-inch-g11-notebook-bottom-cover-replacement-p36

Key facts

HP document part number
N81605-001
Model
HP ProBook 440 G11
Release year
2024
Screen size
14"
Printed pages
37–38

Related