HP ProBook 440 G11 display assembly replacement

Step-by-step HP ProBook 440 G11 display assembly replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN98652-001HP 14-inch WUXGA 300 nit touch display panel for the HP ProBook 440 G11
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 60–66). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP ProBook 440 G11. Confirm the exact model on the service label before starting.

HP ProBook 440 14 inch G11 Notebook display assembly replacement. HP prints this procedure on printed page 60 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. (Select models only) Detach the antenna cables from the WWAN module. (printed page 60).
  2. (Choose models only) Detach the WWAN lead from the main board connector (2). (printed page 60).
  3. (Select models only) Take out the WWAN cable (printed page 60).
  4. Detach the antenna cables from the WLAN module. (printed page 60).
  5. Detach the display cable from carefully the system board ZIF connector. (printed page 60).
  6. Take out the display cable (printed page 61).
  7. Take out the six Phillips M2.5 × 4.0 screws that hold the display assembly to the computer. (printed page 61).
  8. Open the computer to approximately 170° (printed page 61).
  9. Separate the display assembly from the computer. (printed page 62).
  10. To remove the bezel: (printed page 62).
  11. To remove the display panel: (printed page 62).
  12. To remove an IR camera module: (printed page 64).
  13. To remove an FHD camera module: (printed page 64).
  14. To remove the hinges from the display enclosure: (printed page 65).
  15. To remove the display panel/camera lead on models with an IR camera: (printed page 65).
  16. To remove the display panel/camera lead on models with an FHD camera: (printed page 66).
  17. To remove the wireless antennas and cables: (printed page 66).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-440-14-inch-g11-notebook-display-assembly-replacement-p60

Key facts

HP document part number
N81605-001
Model
HP ProBook 440 G11
Release year
2024
Screen size
14"
Printed pages
60–66

Related