Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 830 G11. Confirm the exact model on the service label before starting.
HP EliteBook 830 13 inch G11 Notebook PC audio jack replacement. HP prints this procedure on printed page 52 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N08536-001- Audio jack (included in the Cable Kit). Source: printed page 52.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the audio jack cable out of the usb board zif connector (1). (printed page 52).
- Take out the Phillips 2.0 × 4.0 screw that holds the audio jack to the computer. (printed page 52).
- Take out the audio jack from the computer. (printed page 53).
Parts this procedure uses
- HP Touchpad cable N08536-001 (N08536-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-13-inch-g11-audio-jack-replacement-p52