Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 830 G11. Confirm the exact model on the service label before starting.
HP EliteBook 830 13 inch G11 Notebook PC fan replacement. HP prints this procedure on printed page 38 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N08535-001- Fan. Source: printed page 43.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 36). (printed page 38).
- Take the bottom cover off (the Bottom cover section is on page 36). (printed page 38).
- Detach the battery lead from the main board (the Battery section is on page 44). (printed page 38).
Part numbers in our catalog
- HP fan (N08535-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-13-inch-g11-fan-replacement-p38