Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 830 G11. Confirm the exact model on the service label before starting.
HP EliteBook 830 13 inch G11 display panel with the display attached to the computer replacement. HP prints this procedure on printed page 59 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- To remove the display bezel: (printed page 59).
- To remove the display panel: (printed page 59).
- To remove the display assembly from the computer: (printed page 61).
- To remove the hinge cover: (printed page 63).
- To remove the display panel cable: (printed page 64).
- To remove the hinges: (printed page 64).
- To remove the display transfer board cable: (printed page 65).
- To remove the display transfer board: (printed page 65).
- To remove the ACS board: (printed page 66).
- To remove the camera module cable: (printed page 67).
- To remove the camera module: (printed page 67).
- To remove the microphone module cable: (printed page 68).
- To remove the microphone module: (printed page 69).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-13-inch-g11-display-panel-with-the-display-attached-to-the-compu-12a9-p59