Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 830 G11. Confirm the exact model on the service label before starting.
HP EliteBook 830 13 inch G11 Notebook PC ssd replacement. HP prints this procedure on printed page 41 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M52027-001- 2 TB, PCIe-4 × 4, TLC. Source: printed page 40.M16560-001- 1 TB, PCIe-4 × 4, TLC. Source: printed page 40.N45474-001- 1 TB, PCIe-4 × 4. Source: printed page 40.M17436-001- 512 GB, PCIe-4 × 4, TLC. Source: printed page 40.M52031-001- 512 GB, PCIe-4 × 4, TLC, self-encrypting drive. Source: printed page 40.N35225-001- 256 GB, PCIe-4 × 4, TLC, self-encrypting drive. Source: printed page 41.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Use the tab to remove the SSD cover from the system board. (printed page 41).
- Take out the Phillips M2.0 × 2.5 screw that holds the drive to the computer. (printed page 41).
- Pull the drive away from the socket to take off it (2). (printed page 41).
Part numbers in our catalog
- HP SSD M52027-001 (M52027-001)
- HP SSD M16560-001 (M16560-001)
- HP SSD N45474-001 (N45474-001)
- HP SSD M17436-001 (M17436-001)
- HP SSD M52031-001 (M52031-001)
- HP SSD N35225-001 (N35225-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-13-inch-g11-ssd-replacement-p41