HP EliteBook 830 G11 system board replacement

Step-by-step HP EliteBook 830 G11 system board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN08530-001HP System board plastic USB bracket N08530-001 for the HP EliteBook 830 G11
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 38–58). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 830 G11. Confirm the exact model on the service label before starting.

HP EliteBook 830 13 inch G11 Notebook PC system board replacement. HP prints this procedure on printed page 56 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Detach the following cables from the system board: (printed page 56).
  2. Take out the four Phillips M2.0 × 5.0 screws (1) (printed page 57).
  3. Take out the Phillips M2.0 × 4.0 screw and the Phillips M1.6 × 4.0 screw that holds the system (printed page 58).
  4. Lift the side of the main board upward (1), and after that pull the main board (2) away from the connectors at the side of the machine to lift it out. (printed page 58).
  5. Get the computer ready for disassembly (see that procedure on page 36). (printed page 38).
  6. Take off the bottom cover (see that procedure on page 36). (printed page 38).
  7. Detach the battery cable from the system board (see that procedure on page 44). (printed page 38).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-13-inch-g11-system-board-replacement-p56

Key facts

HP document part number
N90665-001
Model
HP EliteBook 830 G11
Release year
2024
Screen size
13.3"
Printed pages
38–58

Related