HP EliteBook 830 G11 fingerprint reader board replacement

Step-by-step HP EliteBook 830 G11 fingerprint reader board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN08536-001HP Touchpad cable N08536-001 for the HP EliteBook 830 G11
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 46). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 830 G11. Confirm the exact model on the service label before starting.

HP EliteBook 830 13 inch G11 fingerprint reader board replacement. HP prints this procedure on printed page 46 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • N02325-001 - Fingerprint reader board. Source: printed page 45.
  • N08536-001 - Fingerprint reader board cable (included in Cable Kit). Source: printed page 45.
  • N08530-001 - Fingerprint reader insert (for use in models without a fingerprint reader) (included in the Plastic Kit). Source: printed page 45.
  • N93632-001 - Fingerprint read bracket (included in the Bracket Kit). Source: printed page 45.

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Take out the Phillips M2.0 × 2.5 screw that holds the fingerprint reader bracket to the computer, (printed page 46).
  2. Detach the lead from the ZIF plug (3) on the fingerprint reader board. (printed page 46).
  3. Take out the fingerprint reader board from the computer. (printed page 46).

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-13-inch-g11-fingerprint-reader-board-replacement-p46

Key facts

HP document part number
N90665-001
Model
HP EliteBook 830 G11
Release year
2024
Screen size
13.3"
Printed pages
46

Related