Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 630 G9. Confirm the exact model on the service label before starting.
HP EliteBook 630 13 inch G9 bottom cover replacement. HP prints the spare part table for this procedure on printed page 37.
Tools and parts
- Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
- Static-safe work surface
N09820-001- Bottom cover for use in models with a 250 nit or privacy display. Source: printed page 37.N09821-001- Bottom cover for use in models with a 400 nit display. Source: printed page 37.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Loosen the five captive Phillips screws that hold the bottom cover to the computer. (printed page 38).
- Starting near the hinges (printed page 38).
- Take out the bottom cover from the computer (3). (printed page 38).
- Install the bottom cover by working back through the printed removal steps (printed page 38).
Part numbers in our catalog
- HP bottom cover N09820-001 (N09820-001)
- HP bottom cover N09821-001 (N09821-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-630-13-inch-g9-bottom-cover-replacement-p38