HP EliteBook 630 G9 system board replacement

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 630 G9. Confirm the exact model on the service label before starting.

HP EliteBook 630 13 inch G9 system board replacement. HP prints the spare part table for this procedure on printed page 52.

Tools and parts

• Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
• Static-safe work surface
• N09822-001 - Slim. Source: printed page 53.
• N09823-001 - Nonslim. Source: printed page 53.

Preparation

HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.

Replacement

1. Get the computer ready for disassembly (see that procedure on page 37). (printed page 39).
2. Take off the bottom cover (see that procedure on page 37). (printed page 39).
3. Take off the battery (see that procedure on page 44). (printed page 47).
4. Take off the fan (see that procedure on page 50). (printed page 53).
5. Detach the following cables from the system board: (printed page 53).
6. Take out the eight Phillips M2.0 × 4.0 screws that hold the system board to the computer. (printed page 54).
7. Take the USB mount from the left side of the main board (not shown). (printed page 54).
8. Take out the RJ-45 (network) door from the system card (2). (printed page 54).
9. Lift the side of the main board upward (3), and after that pull the main board away from the connectors at the side of the machine to lift it out (4). (printed page 55).
10. Install the system board by working back through the printed removal steps (printed page 55).

Parts this procedure uses

• HP RJ-45 door (not illustrated): Nonslim N09822-001 (N09822-001)
• HP RJ-45 door (not illustrated): Slim N09823-001 (N09823-001)

Part numbers in our catalog

• HP System board for models with integrated UMA graphics memory N10131-xx1 (N10131-xx1)

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-630-13-inch-g9-system-board-replacement-p53