Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 630 G9. Confirm the exact model on the service label before starting.
HP EliteBook 630 13 inch G9 speaker replacement. HP prints the spare part table for this procedure on printed page 45.
Tools and parts
- Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
- Static-safe work surface
M21146-001- Speaker. Source: printed page 46.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Get the computer ready for disassembly (see that procedure on page 37). (printed page 39).
- Take off the bottom cover (see that procedure on page 37). (printed page 39).
- Detach the battery cable from the system board (see that procedure on page 44). (printed page 39).
- Take out the Phillips M2.0 × 2.0 screw that holds each speaker to the computer. (printed page 46).
- Detach the speaker cables from the system board (2). (printed page 46).
- Lift the speakers up (printed page 46).
- Install the speaker by working back through the printed removal steps (printed page 46).
Parts this procedure uses
- HP Speakers M21146-001 (M21146-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-630-13-inch-g9-speaker-replacement-p46