Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 630 G9. Confirm the exact model on the service label before starting.
HP EliteBook 630 13 inch G9 Notebook PC fan assembly replacement. HP prints this procedure on printed page 50.
Tools and parts
- Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
- Static-safe work surface
N09818-001- Fan. Source: printed page 50.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Take out display lead from the clips on the fan (1). (printed page 50).
- Take out the three Phillips 2.0 × 4.0 screws that hold the fan to the computer. (printed page 50).
- Detach the fan cable from the system board (3). (printed page 50).
Part numbers in our catalog
- HP cooling fan N09818-001 (N09818-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-630-13-inch-g9-fan-assembly-replacement-p50