Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 630 G9. Confirm the exact model on the service label before starting.
HP EliteBook 630 13 inch G9 heat sink replacement. HP prints the spare part table for this procedure on printed page 51.
Tools and parts
- Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
- Static-safe work surface
N09819-001- Heat sink. Source: printed page 51.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Get the computer ready for disassembly (see that procedure on page 37). (printed page 39).
- Take off the bottom cover (see that procedure on page 37). (printed page 39).
- Detach the battery cable from the system board (see that procedure on page 44). (printed page 39).
- In the order indicated on the heat sink (printed page 51).
- Take out the heat sink from the computer (2). (printed page 52).
- Wipe the old compound off the heat sink and main board faces components each time the heat sink is removed. (printed page 52).
- Install the heat sink by working back through the printed removal steps (printed page 52).
Part numbers in our catalog
- HP heat sink N09819-001 (N09819-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-630-13-inch-g9-heat-sink-replacement-p51