HP EliteBook 630 G9 fingerprint reader board replacement

Step-by-step HP EliteBook 630 G9 fingerprint reader board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN00097-001HP cable kit (I/O, USB 3.0, touchpad, fingerprint, NFC, card reader cables) for the HP EliteBook 630 G9
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 39–50). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 630 G9. Confirm the exact model on the service label before starting.

HP EliteBook 630 13 inch G9 fingerprint reader board replacement. HP prints the spare part table for this procedure on printed page 49.

Tools and parts

  • Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
  • Static-safe work surface
  • N00879-001 - Fingerprint reader board. Source: printed page 49.
  • N00097-001 - Fingerprint reader board cable (included in Cable Kit). Source: printed page 49.
  • N00113-001 - Fingerprint reader insert (for use in models without a fingerprint reader). Source: printed page 49.

Preparation

HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.

Replacement

  1. Get the computer ready for disassembly (see that procedure on page 37). (printed page 39).
  2. Take off the bottom cover (see that procedure on page 37). (printed page 39).
  3. Take off the battery (see that procedure on page 44). (printed page 47).
  4. Detach the lead from the ZIF plug on the fingerprint reader board (1). (printed page 49).
  5. Take out the Phillips M2.0 × 2.5 screw that holds the fingerprint reader bracket to the computer, and (printed page 50).
  6. Take out the fingerprint reader board from the computer (4). (printed page 50).
  7. Install the fingerprint reader board by working back through the printed removal steps (printed page 50).

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-630-13-inch-g9-fingerprint-reader-board-replacement-p49

Key facts

HP document part number
N03557-001
Model
HP EliteBook 630 G9
Release year
2022
Screen size
13.3"
Printed pages
39–50

Related