HP EliteBook 630 G9 touchpad replacement

Step-by-step HP EliteBook 630 G9 touchpad replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needM21149-001HP Antenna M21149-001 for the HP EliteBook 630 G9
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 39–49). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 630 G9. Confirm the exact model on the service label before starting.

HP EliteBook 630 13 inch G9 touchpad replacement. HP prints the spare part table for this procedure on printed page 48.

Tools and parts

  • Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
  • Static-safe work surface
  • M21148-001 - Touchpad for use in models without NFC. Source: printed page 48.
  • M21149-001 - Touchpad for use in models with NFC (includes NFC antenna). Source: printed page 48.
  • M21138-001 - Touchpad cable (included in Cable Kit). Source: printed page 48.

Preparation

HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.

Replacement

  1. Get the computer ready for disassembly (see that procedure on page 37). (printed page 39).
  2. Take off the bottom cover (see that procedure on page 37). (printed page 39).
  3. Take off the battery (see that procedure on page 44). (printed page 47).
  4. Detach the main board lead from the ZIF connector on the touchpad (1). (printed page 48).
  5. Raise the tape clear of the top of the touchpad (2). (printed page 48).
  6. Let go of the keyboard backlight cable from the adhesive that holds it to the top of the touchpad (3). (printed page 48).
  7. Take out the four Phillips M2.0× 2.0 screws that hold the touchpad to the computer. (printed page 49).
  8. Take out the two Phillips M1.6 × 2.0 screws that hold the touchpad to the computer. (printed page 49).
  9. Lift the touchpad out of the computer (6). (printed page 49).
  10. Install the touchpad by working back through the printed removal steps (printed page 49).

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-630-13-inch-g9-touchpad-replacement-p48

Key facts

HP document part number
N03557-001
Model
HP EliteBook 630 G9
Release year
2022
Screen size
13.3"
Printed pages
39–49

Related