HP EliteBook 630 G9 power connector cable replacement

Step-by-step HP EliteBook 630 G9 power connector cable replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needM21154-001HP power connector cable for the HP EliteBook 630 G9
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 39–56). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 630 G9. Confirm the exact model on the service label before starting.

HP EliteBook 630 13 inch G9 power connector cable replacement. HP prints the spare part table for this procedure on printed page 55.

Tools and parts

  • Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
  • Static-safe work surface
  • M21154-001 - Power connector cable. Source: printed page 55.

Preparation

HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.

Replacement

  1. Get the computer ready for disassembly (see that procedure on page 37). (printed page 39).
  2. Take off the bottom cover (see that procedure on page 37). (printed page 39).
  3. Detach the battery cable from the system board (see that procedure on page 44). (printed page 39).
  4. Move the antenna cables (printed page 55).
  5. Take out the two Phillips M2.5 × 4.0 screws that hold the right display hinge to the computer, and (printed page 55).
  6. Detach the cable from the system board (3). (printed page 55).
  7. Take out the power connector cable from the computer (4). (printed page 56).
  8. Install the power connector cable by working back through the printed removal steps (printed page 56).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-630-13-inch-g9-power-connector-cable-replacement-p55

Key facts

HP document part number
N03557-001
Model
HP EliteBook 630 G9
Release year
2022
Screen size
13.3"
Printed pages
39–56