Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 630 G9. Confirm the exact model on the service label before starting.
HP EliteBook 630 13 inch G9 rtc battery replacement. HP prints the spare part table for this procedure on printed page 47.
tools and parts
- Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
- Static-safe work surface
M34737-001- RTC battery. Source: printed page 47.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
- Get the computer ready for disassembly (see that procedure on page 37). (printed page 39).
- Take off the bottom cover (see that procedure on page 37). (printed page 39).
- Detach the battery cable from the system board (see that procedure on page 44). (printed page 39).
replacement
- Detach the battery cable from the system board (1). (printed page 48).
- Lift the cable off the clips on the computer chassis (2). (printed page 48).
- Use a tool to free the battery from the machine (3). The battery is secured with adhesive. (printed page 48).
- Install the rtc battery by working back through the printed removal steps (printed page 48).
Part numbers in our catalog
- HP RTC (CMOS) battery M34737-001 (M34737-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-630-13-inch-g9-rtc-battery-replacement-p47