Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 630 G9. Confirm the exact model on the service label before starting.
HP EliteBook 630 13 inch G9 nfc module replacement. HP prints the spare part table for this procedure on printed page 46.
Tools and parts
- Tweezers, a pry tool that neither conducts nor marks and a magnetic Phillips P1 driver
- Static-safe work surface
M27890-001- NFC module. Source: printed page 46.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Get the computer ready for disassembly (see that procedure on page 37). (printed page 39).
- Take off the bottom cover (see that procedure on page 37). (printed page 39).
- Take off the battery (see that procedure on page 44). (printed page 47).
- Take out any protective tape covering the card and reuse during replacement. (printed page 47).
- Detach the aerial lead from the ZIF plug on the NFC module (1). (printed page 47).
- Detach the main board lead from the ZIF plug on the NFC module (2). (printed page 47).
- Use a tool to free the module from the machine (3). The NFC module is secured with adhesive. (printed page 47).
- Take out the NFC module from the computer (4). (printed page 47).
- Install the nfc module by working back through the printed removal steps (printed page 47).
Parts this procedure uses
- HP NFC module M27890-001 (M27890-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-630-13-inch-g9-nfc-module-replacement-p47